Industry hot search

Industry hot search

What adhesive is used for lithium battery potting? The Hinnel HNSIL8730 series silicone potting compound is the preferred choice.


Lithium batteries are widely used in communication equipment, transformers, electronic sensors, and other applications, where their performance stability and safety are of paramount importance. As a critical protective material for lithium batteries, encapsulating potting compounds must exhibit thermal conductivity, flame retardancy, and resistance to both high and low temperatures. Two-component thermally conductive and flame-retardant potting compounds, through physical filling and chemical curing, form a stable protective layer that effectively enhances the reliability and service life of lithium batteries.


2026-10-22

A Comprehensive Guide to Capacitor Potting: Protective Benefits, Failure Mitigation Strategies, and Proper Adhesive Selection


A capacitor is a common electronic component, internally composed of a dielectric and electrode plates, and externally encased in an aluminum shell. To protect the capacitor from moisture, contamination, mechanical damage, and other external factors, it is often encapsulated to isolate it from environmental interference, enhance its insulation performance, mitigate vibration‑induced stress, and dissipate internal heat, thereby extending its service life.


2026-10-15

Frequent malfunctions in small appliances? Solve sealing and bonding challenges with high‑quality adhesives.


Consumers’ expectations for the aesthetics, durability, and safety of home appliances continue to rise, highlighting the growing importance of adhesives in structural bonding and sealing protection. From sealing heat-generating components and damping motors to safeguarding electronic parts, selecting the right adhesive formulation can help appliance manufacturers optimize product design and enhance overall device reliability.


2026-10-09

Hard epoxy vs. flexible epoxy: How should you choose for smart water meters?


With the widespread adoption of smart water meters in urban management, the issue of meter sealing has become one of the key concerns. Typically, after installation, smart water meters require sealing to prevent internal leaks and other problems. In this process, the use of potting compounds is particularly critical. So, how should you choose between rigid epoxy and flexible epoxy? Neither is inherently “better”; the choice ultimately depends on the specific application scenario.


2026-09-23

How can we prevent potting compounds from becoming brittle, delaminating, or yellowing?


Adhesives are ubiquitous industrial materials, widely used in construction, automotive, electronics, furniture, and other sectors. However, during practical application, three common failure modes—embrittlement, interfacial debonding, and yellowing of the adhesive—are frequently observed. These issues can directly compromise a product’s electrical insulation, weather resistance, and reliability, and in severe cases, lead to device failure. This paper analyzes the root causes of these failures and proposes targeted preventive measures to mitigate their occurrence.


2026-08-11

Performance Impact Analysis and Storage Guidelines for Delamination in Electronic Potting Compounds?


As a common adhesive, glue plays an important role in our daily lives and work. When potting compounds exhibit layering during storage, does this affect their performance after application? After all, the stability of a glue’s properties is critical to its bonding effectiveness; if storage conditions cause changes in performance, it may compromise the intended results and even pose potential risks to the associated products or projects. Therefore, it is essential to understand how layering in potting compounds impacts their performance.


2026-07-23

What are the applications of silicone sealant in automotive headlights?


Automotive headlights, as critical vehicle components, provide illumination and signaling in a variety of conditions, playing a vital role in driving safety. To ensure their performance and longevity, the manufacturing process requires meticulous sealing with sealant.


2026-07-20

How to choose potting compound for power modules? A detailed guide to low-viscosity, self-leveling, bubble‑free, flame‑retardant AB adhesives.


Power modules—such as switching power supplies, adapters, LED drivers, and charging modules—generate heat during operation and must withstand environmental challenges including vibration, humidity, dust, salt spray, and temperature fluctuations. Potting compounds replace the air inside these modules, delivering superior electrical insulation, moisture and water resistance, and mechanical cushioning, thereby preventing arc flash, short circuits, and component degradation. In particular, for high‑altitude or outdoor applications, potting can significantly enhance dielectric strength and reliability.


2026-07-20

Can sealant and potting compound be used interchangeably?


Sealants and potting compounds are two common types of industrial adhesives, widely used across numerous industries. Although they share certain similarities in some respects, they are not entirely the same. Next, we will examine the key differences between these two materials in greater detail.


2026-07-20

< 1234...8 >