Encapsulation of power modules: which is better, soft gel or hard gel?
The purposes of potting power modules are: protection (waterproofing, dustproofing, moisture resistance, and insulation), heat dissipation, shock absorption, flame retardancy, and safeguarding components. Many buyers immediately ask which is better—soft or hard potting compound—but there is no absolute “better”; the key is selecting what best suits the operating conditions. Since power modules are exposed long-term to harsh environments such as high temperatures, humidity, and vibration, choosing an appropriate potting compound can extend the module’s service life.
Shanghai Hinnel
Nov 20,2026

1. Why can’t power modules do without potting compound?
▪ Impact and Vibration Resistance: Absorbs mechanical stress—without potting, all stress is concentrated on the solder joints, causing them to fracture.
▪ Dustproof and moisture-proof: Isolate dust and moisture to prevent contaminants from causing short circuits.
▪ Insulation Protection: The potting compound has high dielectric strength, effectively isolating high-voltage components and minimizing creepage risk.
▪ Thermal conductivity and heat dissipation: Conduct heat away to prevent overheating and damage to sensitive components.
II. Which potting compound is recommended for power modules?
Hard Epoxy Potting Compound | High-Voltage, Low-Power Supplies, Transformer Driver Modules (No Repairs Required)
After curing, it exhibits high hardness, excellent dielectric strength, moisture and chemical resistance, dimensional stability, and cost-effectiveness. The V0 flame-retardant model is suitable for high-voltage isolated power supplies, industrial switching power supplies, and built-in transformer modules.
Weakness: The adhesive is relatively brittle and prone to developing internal stresses under large thermal cycling; once cured, it cannot be reworked, and disassembly will damage the PCB and components.
Recommendation: An indoor power module that requires no post‑installation maintenance and offers high insulation and structural reinforcement.
Recommended adhesive: Shanghai Hinnel HN6225D epoxy potting compound, Temperature resistance range: -45 to 200°C; thermal conductivity: 1.1–1.2 W/m·K; and excellent resistance to thermal cycling and cracking. The formulation has been optimized to address the common issue of cracking in power modules, reducing curing-induced internal stresses and making it suitable for mass potting applications.

Thermally Conductive Silicone Potting Compound (Elastic Silicone / Silicone Gel) | Automotive Power Supplies, Energy Storage Systems, High-Power Modules, and Applications with Large Temperature Swings (Strongly Recommended)
It has a wide temperature tolerance range (-60 to 200°C), low modulus, minimal stress, and excellent elasticity, enabling it to relieve deformation stresses caused by thermal cycling and prevent damage to chips and surface-mount components due to tensile forces. Thermal conductivity options range from 0.8 to 3 W/m·K; it is waterproof and electrically insulating, and the encapsulant can be removed for repair. Addition-cure silicone is free of small molecules and does not corrode gold-plated pins, making it the mainstream solution for new energy power supplies, automotive DC-DC converters, and inverter modules.
Recommendation: Power modules with high power ratings, significant heat generation, demanding high–low temperature cycling, and requiring repair and maintenance.
Recommended adhesive: Shanghai Hinnel HNSIL8730 silicone potting compound has a wide temperature resistance range, Temperature resistant from -50 to 250°C, with a thermal conductivity of 0.8 W/m·K. It is flame-retardant and insulating, offers excellent elastic cushioning, and is well-suited for high-power supplies and outdoor power sources—environments characterized by significant temperature fluctuations.

Some customers blindly choose soft elastomers for ease of repair, but when the product is exposed outdoors in humid conditions, soft elastomers offer weaker resistance to moisture penetration than epoxies. Others insist on using rigid epoxy adhesives, yet large temperature fluctuations cause batch‑wide cracking of the adhesive layer. Material selection should not be based solely on reworkability or merely on moisture resistance and insulation; it must consider Operating environment, temperature variations, protection rating, after-sales service plan Evaluate them comprehensively as a whole.
We can provide Epoxy, silicone, and polyurethane potting compounds, We support customization of thermal conductivity, flame retardancy, transparency/black/gray color options, color matching, and viscosity. Sample testing is available, along with guidance on compatible potting processes.
III. FQA
Q: For potting outdoor power modules, should I use soft or hard encapsulant?
A: Outdoor environments experience large diurnal temperature variations, as well as exposure to sunlight and rain, resulting in relatively harsh operating conditions. If For outdoor applications with large temperature fluctuations that require after-sales maintenance, silicone soft gel is preferred; for enclosed environments with no planned maintenance, low-stress epoxy hard gel is preferred. Shanghai Hinnel offers corresponding low-stress epoxy and flame-retardant silicone potting compounds for outdoor power supplies for sampling.
Q: Is there a big difference in curing time between soft and hard rubber?
A: For two-component potting compounds of the same type, there is usually no significant difference in curing time between the soft and hard formulations. The speed of curing is primarily determined by the adhesive formulation, the curing agent system, the ambient temperature, and the adhesive layer thickness; the softness or hardness of the cured adhesive is not a key factor affecting the curing rate. In summer, higher temperatures accelerate curing, whereas in low-temperature environments, curing slows down significantly for both epoxy rigid adhesives and silicone soft adhesives.

Q: Will epoxy hard glue always crack?
A: Epoxy rigid adhesives do not necessarily crack. With an appropriate formulation and proper potting procedures, epoxy adhesives can provide long-term stable performance. Selecting a low‑stress epoxy potting compound and carefully controlling the potting layer thickness to avoid excessive thickness, along with minimizing rapid temperature excursions during testing and service to reduce thermal expansion‑contraction‑induced internal stresses, can significantly reduce the likelihood of cracking.
Note: Some content is sourced from the internet; please contact us for removal if there is any infringement.
° Send an email to sales@hinnel.com Email box ;
° Whatsapp: 86- 18301723907.
Previous page:
>Recommended Reading
Shanghai Hinnel
Nov 18,2026
Shanghai Hinnel
Nov 12,2026
