NEWS

What types of electronic potting compounds are available for PCBs, and how do you choose the right one?

When it comes to waterproofing, insulating, and dissipating heat for circuit boards, many engineers immediately think of potting compounds—yet they often can’t tell the differences between epoxy, silicone, and polyurethane. Even among potting compounds, some withstand high temperatures, others are so rigid they’re impossible to disassemble, and still others are designed specifically for easy maintenance. So how do you choose the right potting compound for PCBs? Read on to avoid common pitfalls.

 

1. What is PCB potting compound?

 

PCB electronic potting compound is a material used for the protection and encapsulation of PCB boards and their components. By fully encapsulating the PCB in a colloid, electrical insulation, mechanical protection, and environmental protection are provided. The goal is to extend the service life of electronic products and ensure their stable operation in harsh environments.

 

II. Applications of PCB Electronic Potting Compound

 

PCB electronic potting compounds are widely used in various electronic devices that require electrical insulation, mechanical protection, and environmental resistance, primarily including:

 

Consumer Electronics: Such as smartphones, tablets, and laptops.

Industrial Control: Such as PLC control systems, sensors, and variable frequency drives.

Automotive Electronics: Such as ECUs, sensors, and displays.

Communication equipment: Such as base stations, routers, and switches.

Medical Electronics: Such as medical monitoring devices and diagnostic instruments.


 

III. Common Potting Compounds Available on the Market:

 

(1) Epoxy potting compound:

 

Epoxy potting compound exhibits high hardness after curing. (Shore hardness can reach 80D or higher) , excellent mechanical strength, strong adhesive force, outstanding chemical resistance, and superior insulation properties. The standard type is temperature-resistant up to approximately 100℃ , heat-curable type It can reach 150°C or even exceed 300°C.

 

Advantages: It offers strong adhesion to hard materials, is easy to apply, and remains stable before and after curing, making it ideal for the long-term protection of small to medium-sized components such as transformers, capacitors, and LED driver power supplies.

 

Disadvantages: It has poor resistance to thermal shock, becomes hard and brittle upon curing, is difficult to repair, and generally cannot be reworked. Transparent epoxy resins have only moderate weatherability and tend to yellow under light or high temperatures.

 

Scope of application: It is generally used for potting non-precision electronic components such as transformers, regulators, industrial electronics, relays, controllers, and power modules.

 

(2) Silicone potting compound:

 

Silicone potting compounds exhibit excellent elasticity. (Hardness typically ranges from 20 to 60A) , wide high- and low-temperature resistance range (-60℃ to 250℃ or even higher) , can be -60~250℃ Remains elastic and does not crack across the temperature range.

 

Advantages: It exhibits excellent electrical insulation properties, resists yellowing, and, once cured, has a relatively soft texture that can mitigate most mechanical stresses and provides good shock absorption. And It offers excellent rework capability, allowing sealed components to be quickly and easily removed for repair or replacement. Addition-cure silicone exhibits extremely low shrinkage (<0.5%), making it suitable for high-end precision components.

 

Disadvantages: Adhesion to components and the potting cavity is relatively poor.

 

Scope of application: Suitable for potting various electronic components that operate in harsh environments, as well as high-end precision and sensitive devices. Examples include LEDs, display panels, photovoltaic materials, diodes, semiconductor devices, relays, sensors, automotive ballasts (HIV), vehicle control units (ECU), and more. Its primary functions are insulation, moisture protection, dust resistance, and shock absorption.

 

Reference for corresponding models: Hinnel HNSIL 8730 Addition-Curing Silicone Potting Compound , Temperature resistance range: -50 to 250°C. This model is our flagship offering for high-power PCBs, BMS, and outdoor driver boards. It features low viscosity and self-leveling properties, with optional thermal conductivity. The flame-retardant version meets UL94 V-0. Curing produces no small-molecule volatiles, it has been optimized to resist poisoning, and it exhibits excellent compatibility with cleaned PCBs. It can be cured at room temperature or with heat, balancing reworkability with long-term outdoor aging resistance.

 

(3) Polyurethane potting compound:

 

Polyurethane potting compound exhibits excellent flexibility after curing. (Hardness typically ranges from 20 to 70A), Highly resilient, with excellent vibration resistance and moisture protection.

 

Advantages: It exhibits excellent low-temperature resistance and good adhesion to common potting materials, with bond strength intermediate between epoxy resins and silicones.

 

Disadvantages: Moderate high-temperature resistance (up to about 130°C), It is hygroscopic and has poor UV resistance; bubbles readily form after potting, necessitating vacuum degassing.

 

Reference for corresponding models: Hinnel PU550/PU512 polyurethane potting adhesive , PU550 temperature resistance range (-45~130℃), PU512 temperature resistance range (-50~135℃), It is easy to use, flows and levels well, and has good self-deaeration. After curing, it exhibits moderate elasticity and provides stable adhesion to PCBs and plastic housings. It is suitable for mass potting of low-heat indoor control boards, security motherboards, and standard sensors, and is environmentally friendly and RoHS compliant.

 

Scope of application: Generally used for potting electronic components with low heat generation. Transformers, chokes, converters, capacitors, coils, inductors, rheostats, linear motors, fixed rotors, circuit boards, LEDs, pumps, and more.


 

IV. How to select potting compound for PCBs?

 

When selecting a PCB potting compound, it is necessary to comprehensively consider the following factors:

 

1. Electrical Insulation Performance: Ensure that the selected adhesive has a high insulation resistance to prevent circuit shorting and electrical interference.

 

2. Mechanical protection performance: Select the appropriate adhesive hardness and tensile strength based on the mechanical protection requirements of the application.

 

3. Thermal conductivity: Select an appropriate thermal conductivity based on the heat generation and cooling requirements of the electronic components to ensure effective heat dissipation for the equipment.

 

4. Environmental Resistance: Select an adhesive with appropriate environmental resistance based on factors such as temperature, humidity, and chemical exposure in the application environment.

 

5. Operating Procedure: Choose an adhesive that is easy to apply and has an appropriate curing time to improve production efficiency and ease of use.

 

V. Common issues encountered when potting PCBs:

 

Q: For thermally conductive potting compounds, is a higher thermal conductivity always better?

 

A: No. The higher the thermal conductivity, the more thermally conductive powder is packed in, resulting in higher colloid viscosity and poorer flowability. This makes it difficult to fill component gaps, leading to voids and ultimately degrading both heat dissipation and insulation performance. Prioritize ensuring liquidity, then match thermal conductivity requirements.

 

Q: For the same type of potting compound, what are the consequences of an incorrect mixing ratio?

 

A: If the ratio of components A and B in a two-part adhesive deviates significantly, it will result in Incomplete curing, softness and stickiness, drift in curing time, and a significant reduction in strength and insulation. Manual glue mixing is prone to errors; for mass production, it is recommended to use an automatic dispensing machine.

 

Q: PU potting compound provides good waterproofing; can it be used submerged in water for extended periods?

 

A: Prolonged continuous immersion is not recommended. Polyurethane exposed to water for extended periods… It undergoes slow hydrolysis; the colloid gradually softens and separates into layers, and its waterproof performance slowly deteriorates. It is suitable only for intermittent exposure to water and indoor humid environments. For long-term underwater immersion, epoxy or silicone is preferred.

 

Among the many types of PCB potting compounds, each has its own advantages and disadvantages. How do you choose the right one for your needs? First, clearly define your product’s characteristics and requirements, then select a suitable compound that meets your manufacturing process specifications.

 

Shanghai Hinnel New Materials is deeply engaged in the field of electronic adhesives, our Silicone, polyurethane, and epoxy potting compounds have been extensively validated under real-world PCB operating conditions. If you’re unsure about selecting the right product or would like to test a sample, feel free to reach out. We provide hands-on technical support, from material selection to encapsulation processes.

 

Note: Some content is sourced from the internet; please contact us for removal if there is any infringement.

 

 

linnel

 

°   Send an email to sales@hinnel.com Email box ;

°   Whatsapp:  86- 18301723907.