How should you choose potting compound for temperature sensors?
In electronic device manufacturing, the stability of temperature sensors directly impacts product performance. Among the key materials, adhesives play a crucial role in mounting, sealing, and thermal conduction. This article reviews the common types of adhesives used in temperature sensors, their properties, and typical application scenarios, helping industry professionals select the most appropriate solutions.
Shanghai Hinnel
Sep 08,2026

Encapsulation of temperature sensors presents three particular challenges:
First, the potting space is extremely limited, and the adhesive material needs to… Extremely low viscosity, excellent fluidity Only then can it be properly filled;
Second, the sensor has stringent requirements for signal accuracy, and the potting compound must… Low dielectric constant, low loss factor , must not interfere with signal transmission;
Third, many sensors are required to maintain long-term contact with hydraulic fluids and chemicals, so the potting compound must possess… Excellent chemical resistance.
Application of potting compounds in temperature sensors:
I. Fixed Sensor Probe
In sensor devices, temperature sensors typically rely on probes to detect temperature changes. To ensure the probe’s stability and accuracy, a potting compound is used to secure it within the device. This compound firmly bonds the probe to the circuit board, preventing displacement or vibration during operation and thereby enhancing the device’s measurement precision and reliability.
II. Transmission Signals
After a temperature sensor detects a change in temperature, it must transmit the signal via wiring to the device’s main control chip for processing. During this process, the potting compound used in the temperature sensor serves to provide electrical insulation and mechanical protection. The potting compound can… It prevents short circuits and electric shocks between circuits, protects the conductors from external environmental factors, and thereby ensures stable signal transmission.

III. Moisture and Water Resistance
In sensor devices, moisture and water are critical factors that can compromise normal operation. If the interior of the device becomes damp or water enters, it may cause short circuits or sensor failure. Therefore, using potting compound for temperature sensors to ensure airtight sealing is essential. The potting compound forms a protective barrier on the device’s surface… It forms a hard protective layer that prevents moisture and water from entering the equipment, thereby ensuring its proper operation.
IV. Enhancing Equipment Reliability
Using potting compound for temperature sensors securely bonds the sensor to the circuit board, preventing displacement or vibration during operation. Moreover, the potting compound offers excellent insulation and sealing properties, effectively guarding against short circuits and electric shocks between circuits and ensuring the safe operation of the equipment. Consequently, employing potting compound for temperature sensors enhances device reliability and stability, thereby extending the equipment’s service life.
What are the commonly used adhesives for temperature sensors?
(1) Silicone potting compound
It is a widely used category of temperature sensors, with a broad temperature‑resistance range ( -50℃~250℃ ), with excellent elasticity and low stress, it does not exert any tensile force on the temperature-sensing element; its thermal conductivity is adjustable, and it offers waterproof insulation and resistance to… UV It boasts excellent weather resistance and is suitable for a wide range of applications, including automotive, outdoor, and industrial settings.
(2) Epoxy Resin Potting Compound
After curing, it exhibits high hardness, strong adhesive strength, and excellent mechanical protection. It also offers outstanding resistance to acid and alkali corrosion and superior electrical insulation, making it well suited for industrial control cabinets and built-in temperature sensors in conventional household appliances—applications where ambient temperature fluctuations are moderate and high impact resistance is required.
(3) Polyurethane Potting Compound
Its hardness falls between that of epoxy and silicone, offering excellent toughness and outstanding low-temperature resistance. It exhibits strong water‑proofing, moisture resistance, and hydrolysis resistance, with mild exothermic curing. It is compatible with miniature temperature‑sensing devices and is widely used in temperature sensors for kitchen and bathroom appliances as well as consumer electronics.

Targeting NTC Based on the application scenarios of temperature sensors, combined with product performance requirements and manufacturing process characteristics, we provide recommendations for selecting suitable adhesives.
NTC Temperature sensor / Recommended adhesives for thermistors:
1、HN6225R It is specially designed for NTC Temperature sensor / A two-component, heat-curable epoxy encapsulant developed for thermistors. A/B After mixing the two components, the formulation exhibits a long pot life, high thixotropy, low heat of cure and low shrinkage. The cured surface is smooth and glossy, with excellent resistance to temperature, water, oil, corrosion, and outstanding electrical insulation properties. It also complies with… Rohs 、 reach 、 High Frequency Environmental certification.
Quality ratio A:B:C = 100:13:1~3% (Only when you want to reduce the encapsulation of… Head Size Only need to add when necessary. C Component, addition level is AB of the mixed quantity 1%~3% , without affecting product performance) Temperature resistance range -40~150℃ 。
Post-Curing Properties | Unit or Condition | Test Results |
Hardness | Shore D, 25℃ | >80 |
Volume resistivity | Ω·cm, 25℃ | >1.0×10¹⁴ |
Dielectric strength | KV/mm,25℃ | ≥18 |
Dielectric constant | 1.2 MHz, 25°C | 3.6±0.5 |
Shrinkage rate upon curing | % | <0.5 |
Thermal conductivity | W/m·K | 0.6~0.8 |
Water absorption rate | 25℃, 24h, % | ≤0.3 |
Linear expansion coefficient | um/m/℃ | 35~45 |
Glass transition temperature TG | °C | 120~130 |
2.HN6223D or HN6225D Potting compound for high-temperature sensors, It features low mixed viscosity, rapid curing, and, after curing, excellent high-temperature resistance—without delamination or cracking.
Post-Curing Properties | HN6223D | HN6225D |
Hardness Shore D, 25℃ | ≥85 | ≥85 |
Thermal conductivity W/m.k | 1.0~1.1 | 1.1~1.2 |
Coefficient of thermal expansion um/m·℃ | 25~35 | 30~33 |
Volume resistivity Ω·cm, 25℃ | >1.0×10¹⁵ | >2.0×10¹⁵ |
Dielectric strength KV/mm,25℃ | >15 | >20 |
Dielectric constant 25℃, 1.2 MHz | 2.6~3.2 | 2.6~3.2 |
Shrinkage rate upon curing % | <0.2 | <0.2 |
Glass transition temperature (Tg) °C | 195~205 | 155~165 |
Temperature range °C | -45~250 | -45~200 |
In summary, selecting an appropriate potting compound for sensors is critical to ensuring product performance and stability. We hope this article has been helpful; for further questions, please consult a qualified professional for guidance.
Note: Some content is sourced from the internet; please contact us for removal if there are any infringements.
° Send an email to sales@hinnel.com Email box ;
° Whatsapp: 86- 18301723907.
>Recommended Reading
From automotive to industrial manufacturing, how do you choose the right adhesive for sensors?
Shanghai Hinnel
Nov 05,2026
How to choose potting compound for photovoltaic inverters? From operating conditions to materials.
Shanghai Hinnel
Nov 03,2026
Shanghai Hinnel
Oct 27,2026
