Lubricating silicone grease
Lubricating silicone grease
Wide temperature resistance range, extremely low oil leakage rate, and low volatility.
Helping you overcome challenging lubrication issues.
Lubricating silicone grease is a lubricant derived from the secondary processing of polyorganosiloxanes, exhibiting excellent properties such as safety and non-toxicity, heat resistance, oxidation resistance, mold-release capability, and electrical insulation. It is typically used within a temperature range of –50°C to +260°C, is non-corrosive to iron, steel, aluminum, copper, and their alloys, and provides effective lubrication on materials including plastics, rubber, wood, glass, and metals.
Shanghai Hinnel offers a high-performance silicone‑based transparent grease for dielectric insulation, surface protection, mold release, and lubrication, while also providing resistance to chemical media, oxidation, dust, radiation, and aging, along with excellent chemical stability and a long service life.
Product用途:
Designed for applications requiring lifelong lubrication and waterproof sealing of plastic–plastic, plastic (or rubber)–metal components, and sliding bearings, particularly in low‑torque operation under low‑temperature or high‑temperature conditions.
Hinnel product features
Excellent water resistance, providing long-lasting lubrication and sealing in humid environments.
Extremely low volatility and diffusivity
Low coefficient of friction and high load-bearing capacity.
Excellent antioxidant and thermal stability, with an exceptionally long service life.
Excellent electrical insulation ensures the safety of electronic and electrical products.
It has a wide operating temperature range and can maintain consistent performance even under extreme temperature variations.
The material exhibits excellent compatibility and is compatible with most plastics and metals.
Non-toxic, odorless, and non-irritating, fully compliant with environmental protection standards.
| Product model | Appearance | Density | Penetration degree | Penetration degree | Volatile matter | Oil separation degree | Volume resistivity | Breakdown strength | Operating temperature |
| g/cm3 25℃ | mm/10 (static) | mm/10 (dynamic) | 200℃, 24h, % | 200℃, 24h, % | 200℃, ohm-cm | 1.25mm gap KV/mm |
°C | ||
| HN433 | Translucent, uniform paste | 1.05 | 310 Min | 370 Max | ≤2.0 | ≤0.5 | 0.2×10 15 | 18 | -60~200 |
| HN434 | Off-white, uniform paste | 1.05 | 200 Min | 260 Max | ≤2.0 | ≤0.5 | 0.2×10 15 | 18 | -60~200 |
Instructions for Use
1. Clean the surface: Before applying silicone grease lubricant, thoroughly clean the lubrication area to prevent contamination and ensure optimal lubrication performance. Additionally, if old lubricant is already present, it must be removed first.
2. Select the appropriate amount: Choose an adequate quantity of silicone grease based on the size of the lubrication point and the specific lubrication requirements. The amount of silicone grease used may vary depending on the application and equipment. In general, the lubricant…
The amount used should be kept within an appropriate range, avoiding both excess and deficiency.
3. Even Application: Apply the silicone grease evenly to the lubrication points, using a brush, cloth, or other suitable tool to ensure uniform distribution. If the silicone grease is relatively thick, apply it with moderate pressure to achieve an even coat.
4. Adequate Lubrication: After coating, allow the silicone grease lubricant to fully penetrate the lubricated areas to achieve optimal lubrication performance. During use, if dryness or rusting is observed on the lubricated parts, replenish the lubricant promptly.
Notes and FAQs
1. Silicone grease should not be mixed with other lubricants to avoid compromising its lubricating performance.
2. Silicone grease lubricant should be stored in a dry, cool, and well-ventilated area, away from direct sunlight and high temperatures.
3. Silicone grease lubricants generally do not corrode metals or plastics, but it is necessary to select the appropriate lubricant based on the specific application.
4. How can the quality of silicone grease be assessed? The quality of silicone grease is primarily evaluated based on indicators such as extreme-pressure performance, friction-reducing properties, oxidation resistance, corrosion resistance, volatility, and free‑base content.
5. Silicone grease lubricants typically have a service life of 1–2 years; prolonged storage or uneven application may also shorten their lifespan.
Silicone grease is an excellent lubricant that helps improve equipment efficiency, extend service life, and reduce maintenance costs. When using silicone grease, be sure to select the appropriate grade and type, and apply it according to the specific lubrication requirements of each component.
Select an appropriate lubricant based on the requirements and operating environment.
Shanghai Hinnel provides innovative adhesive solutions for bonding, sealing, potting, thermal management, and protection. Our team works closely with customers to help enhance the value of their products. In an ever-evolving market, we continuously innovate and respond swiftly, committed to delivering professional products and technical support to customers worldwide.
The product’s TDS, MSDS, RoHS, REACH, and other relevant documents can be obtained via the following methods:
✓ Online Message on This Site
✓ Email: sales@hinnel.com
✓ Phone: 021-57896706 for inquiries
✓ Our company’s official WeChat account: Shanghai Hinnel New Materials Technology Co., Ltd.
✓ Please contact our relevant sales representatives directly to obtain it.
Our products don’t stop here.
We have a dedicated team of marketing professionals and R&D experts who can provide you with tailored adhesive solutions perfectly suited to your specific needs.
How can we assist you?
