Adhesive Solutions for Electric Control Systems in New Energy Vehicles
The primary powertrain of new‑energy vehicles comprises three key components: the battery, the electric drive system, and the electronic control unit. Among these, the electronic control system is one of the core elements, demanding encapsulating adhesives with superior electrical performance, outstanding thermal stability, excellent insulation properties, and robust water‑ and moisture‑resistance. Conventional adhesive materials can no longer meet the stringent requirements of modern electronic control systems; accordingly, developing advanced, specialized adhesives that align with the needs of new‑energy vehicle ECUs has become a central focus in the industry. Below, we introduce adhesive solutions tailored for the electronic control systems of new‑energy vehicles.
Shanghai Hinnel
Jul 20,2026
Recommended Adhesives for Electric Vehicle Electronic Control Systems:
IGBT Module encapsulation
When soldering the metal connector to IGBT During the fabrication of module substrates, the substrate materials—often thin and brittle, such as ceramic substrates—are prone to fracture or damage.
Product Recommendations: HNGel 5272 Silicone gel 、HNEP6320 Epoxy potting compound provides electrical insulation, thermal conductivity, and mechanical protection, preventing module failure due to vibration or high temperatures.
Battery Management System PCB
BMS PCB Installation scenarios (vehicle-mounted chassis, battery packs, energy storage cabinets) commonly experience severe vibration and impact (in-vehicle: 10-2000Hz Frequency, ≤20g Acceleration; Energy storage: Transportation / Installation impact ≤50g ), the core function of the gelatinous class is “ Fixed components, stress buffering ”。
Product Recommendations: HNEPD120 Epoxy structural adhesive , secure electronic components, provide moisture and corrosion resistance, and enhance the reliability of circuit boards in vibratory environments.
Motor controller heat sink
of the motor controller IGBT Module (in-vehicle) / (Industrial-grade) during operation, the heat dissipation power of a single unit can reach 50-200W , heat flux density exceeds 100 W/cm² , the contact gap between the heat sink and the component (even when tightened with bolts, there still remains 20–50 μm (The microscopic gaps) must be filled with adhesive.
Product Recommendations: HNSIL 420 High-thermal-conductivity thermal grease / HNSIL 8730 Thermally conductive potting compound fills the gap between the heat sink and the power device, reducing thermal resistance and preventing overheating damage.
High-voltage connector sealing
Even with mechanical seals—such as sealing rings—installed on the mating surfaces of high-voltage connectors, the gaps between terminals and the housing, cable exit ports, and other areas still present… 10–50 μm The microscopic gaps, the sealant is “At the end” A layer of protection ”。
Product Recommendations: HNSIL 734 Organosilicon adhesive sealant , fast surface drying, high strength, waterproof and dustproof, ensuring the insulation safety of high-voltage components and preventing short circuits.
Sensor packaging
The core of a sensor is the sensing element (such as MEMS (chips, piezoelectric ceramics, optical lenses, thermocouples), the encapsulating adhesive is “ The first environmental barrier ” , the absence of adhesive can lead to direct ingress of external media.
Product Recommendations: HNEP6225 Epoxy potting compound /HNPU 512 Polyurethane potting compound, protecting sensitive components from moisture, chemical corrosion, and mechanical impact.
Wire Harness Fixing and Insulation
Adhesives (such as fixing adhesive and binding auxiliary adhesive) can secure wire harnesses to brackets. / On the housing, avoid friction or pulling against surrounding components; without adhesive, the wire harness may… “ Free swaying ” , leading to localized wear.
Product Recommendations: HNPU7003 Polyurethane structural adhesive , secure and insulate the wiring harness to prevent abrasion and short circuits.
Housing sealing ( ECU/VCU )
ECU/VCU At locations such as the mating surfaces of the housing (top cover and base), cable‑exit ports, and connector mounting holes, even when mechanical latches or bolted fasteners are incorporated into the design, there still remains… 10–50 μm The microscopic gaps, sealant is “ The only environmental barrier ”。
Product Recommendations: HNSIL 736 Organosilicon adhesive sealant, titanium ester system, dustproof and waterproof, enhances the housing. IP Grade, adapted to extreme temperature fluctuations.
Capacitor / Inductance fixed
Capacitor / Inductors rely solely on the solder joints of their leads (shear strength) 10-25N ) Fixed; without adhesive, it cannot withstand vibration or impact (in-vehicle: 10-2000Hz、 ≤25g Acceleration; Industry: Transport Shock ≤50g ), triggering a cascade of mechanical failures.
Product Recommendations: HNEPD120, 2:1 Epoxy structural adhesive, resistant to high temperatures and impact, prevents component loosening that could lead to circuit failures.
Adhesive solutions for automotive electronic control are key to ensuring the stable operation of automotive electronic control systems. To meet evolving market demands, Hinnel consistently demonstrates flexibility, keeping pace with innovation and technology, and ensuring continuous product updates and iterations to satisfy the adhesive requirements of customers across various industries. For more information on potting compound performance and related details, please contact us for a comprehensive consultation.
Note: Some images are sourced from the internet; please contact us for removal if there is any infringement.
° Send an email to sales@hinnel.com Email box ;
° Call the hotline. +86-021-5789 6706 Consultation ;
° Call technical support +86-18121338868 Consultation.
>Recommended Reading
Shanghai Hinnel
Nov 12,2026
From automotive to industrial manufacturing, how do you choose the right adhesive for sensors?
Shanghai Hinnel
Nov 05,2026
How to choose potting compound for photovoltaic inverters? From operating conditions to materials.
Shanghai Hinnel
Nov 03,2026